2-1/4" Paired Line Targets (707)
SKU
707 Series Paired Line Targets
Plexiglas circular target may be backlit
The 707 paired line target pattern is machine engraved and black filled, on circular white plexiglas. The pattern has two paired lines that do not cross each other (a white cross outlined with black lines in each corner). These targets are translucent and may be backlit for additional visibility in low light applications. Backlighting this target when used as the far target in a line of bore targets gives a great diffuse backlight for the other targets in the line. The 2¼" (57.2 mm) diameter meets A.I.A. specifications. It may be used in our spherical targeting systems. These targets have holes drilled through on the target's diameter for mounting and to facilitate target removal from tight spots.
The 707 is available in a wide variety of target pattern spacings as presented in the table below. The target spacing is engraved at the top of the target (in inch units). We have information to help you choose the proper target line spacing in the knowledgebase.
We also have other similar targets.
| Model | Target Spacing |
| 707-5 | 0.005" (0.13 mm) |
| 707-10 | 0.010" (0.25 mm) |
| 707-15 | 0.015" (0.38 mm) |
| 707-20 | 0.020" (0.51 mm) |
| 707-25 | 0.025" (0.64 mm) |
| 707-30 | 0.030" (0.76 mm) |
| 707-35 | 0.035" (0.89 mm) |
| 707-40 | 0.040" (1.01 mm) |
| 707-45 | 0.045" (1.14 mm) |
| 707-50 | 0.050" (1.27 mm) |
| 707-60 | 0.060" (1.52 mm) |
| 707-70 | 0.070" (1.78 mm) |
| 707-70 | 0.080" (2.03 mm) |
| Diameter in | 2.2498 – 2.2493 |
|---|---|
| Diameter mm | 57.145 – 57.132 |
| Finish | None |
| Max Operating Temperature | 190° F (87° C) |
| Mounting Holes | 0.1935″ (4.9 mm) drilled through on 1.880″ (47.75 mm) between centers |
| Pattern | Centered with respect to the diameter within 0.001" (0.025 mm), T.I.R. |
| Target Thickness | Nominally 3/8″, actual thickness may vary due to nature of material |
